Water system fire extinguishing agent is a fire extinguishing facility that can rescue combustible solids, combustible fuels, combustible gases and other initial fires. Its fire extinguishing effect is stronger than that of dry powder and 1211 fire extinguishers. It not only has high fire extinguishing efficiency, but also has certain recurrence prevention. It is an indispensable fire fighting equipment for fire prevention. Our company is a professional, authoritative and reliable fire certification agency, with more than 10 years of rich experience and a strong professional and technical team. Then, let's learn about the use of water-based fire extinguishing agents and precautions!

the use of water extinguishing agent method:

1. When using water extinguishing agent, pull out the safety pin to get close to the ignition point.

2. Take the open handle in one hand and the spray gun in the other. When opening the handle, press down and hold it firmly. After the fire extinguisher is closed and opened, air foam is sprayed from the spray gun.

3. After the foam is sprayed, the spray gun should be pointed to the place where the fire is large, and the fire extinguisher should be kept vertical to the ground, not sideways or upside down.

pay attention to matters of water system fire extinguishing agent:

1. When using water-based fire extinguishing agent, one is to pull up the pull ring and the other is to press the handle. However, please take care to unplug the safety pin first to prevent the fire extinguishing material from spraying out.

2. Water system fire extinguishing agent injection time is short, before use should be the spray hose aimed at the flame and then open the valve, water system fire extinguishing agent spray distance is very short, when using, please the operator to ensure their own safety at the same time as close to the fire.

3 The water-based fire extinguishing agent does not need to be used upside down, but the injection effect will be better if the cylinder is moved up and down several times before use and the water-based fire extinguishing agent is loosened.

4. There is no concentrated spray of water system fire extinguishing agent, and it is easy to scatter after spraying. Therefore, when spraying, the operator should stand in the upwind direction of the fire source.

5. The water system fire extinguishing agent is not sprayed from the upper flame, but should be flat at the root of the flame, from near to far, pushing forward horizontally and crossing left and right to avoid the flame escaping.

6. The water system fire extinguishing agent is easy to take and put in a ventilated, cool and dry place to prevent the water system from caking due to the humidity of the cylinder.

The advantages and characteristics of water system fire extinguishing agent are obvious, but it should be operated according to the method, otherwise, some accidents may occur. These knowledge points should be mastered by everyone. When using water-based fire extinguishing agent, please pull out the safety pin first and get close to the fire point. The nozzle is then pressed against the handle toward the flame, causing the extinguishing agent therein to be ejected. Then, apply the fire extinguishing agent evenly to the entire fire area and spray it for a period of time to avoid recurrence. Even in places where tanning and fire are strictly prohibited, please make friends early. After use, regularly check the pressure and internal and external appearance for rust. If there are these problems, It should be resolved immediately. When the pressure gauge pointer is lower than the green line area, it should be charged and repaired immediately.

They are related to the use of water-based fire extinguishing agents. They should be operated correctly when used. In addition, please keep them properly after use and do not decompose them when you do not understand them. In addition, please control the spreading distance of live objects to less than 1 meter when extinguishing fire. After the fire is extinguished, it is everyone's responsibility to clean the site after cutting off the power supply and prevent fires. Only by fully mastering the use of fire-fighting equipment can we better prevent fires, protect the safety of life and property.

The above introduction is the use of water system fire extinguishing agent and precautions, if you need to know more, you can contact us at any time!